Order this Assignment Now: £129 VALID THRU: 18-May-2024
LO1 Discuss the fundamentals of electricity, magnetism, transformers and circuits
The price is for Assignment 1 only.
Fundamentals of Electricity, Magnetism, Transformers and Circuits Assignment front sheet
Qualification
Unit number and title
HNC in Construction and the Built Environment
Unit 18: Principles of Electrical Design and Installation
Student Name
Student Number
Date issued
Completion date
Submitted date
IV Name and Date
11/10/2023
15/11/2023
Assignment title
Fundamentals of Electricity, Magnetism, Transformers and Circuits (Assignment 1 of 3)
Submission Format
The submission is in the form of an individual written report. This should be written in a concise, formal business style, using single spacing and font size 12. You are required to make use of headings, paragraphs and subsections, as appropriate, and all work must be supported with research and referenced using the Harvard referencing system. Provide a bibliography using the Harvard referencing system. The recommended word limit is 2000–2500 words. You will not be penalised for exceeding the total word limit.
Learner Declaration
I certify that the work submitted for this assignment is my own and research sources are fully acknowledged.
Learning Outcomes
LO1 Discuss the fundamentals of electricity, magnetism, transformers and circuits
Assignment Brief
Written report
* Please take note of all the grading criteria below on how each Pass, Merit and Distinction point is assessed.
You are an electrical engineer working for a consultancy and have been tasked with refurbishing the lighting and power within an office.
Currently the office is illuminated using fluorescent lighting using magnetic ballast transformers as current control in the luminaries.
Explain the performance of the electric and magnetic circuits employed within the lighting equipment including the transformers.
If the new lighting installation is going to comprise of 6 LED luminaries with an individual resistance of 15Ω, illustrate the key principles of connecting the circuits in series and then parallel stating the advantages and disadvantages of the methods.
Using Appendix H of the On Site Guide, design a power circuit for the office in the drawing provided using the symbol set at the end of The On Site Guide and state the regulations in the guide that you used to make your decisions for placing the equipment and the equipment choice.
Within the building in the above scenario, there are 6 offices and a kitchen. These employ radial power circuits, ring power circuits, lighting circuits and an instantaneous water heater rated at 5 kW. Evaluate the use of these circuits. Discuss maximum current carrying capacities of the cables, power values, cable sizes and circuit protection for the range of circuit applications.
Learning Outcomes and Assessment Criteria
Learning Outcome
Pass
Merit
Distinction
LO1 Discuss the fundamentals of electricity, magnetism, transformers and
P1 Explain the performance of electrical and magnetic circuits, including transformers
M1 Design a simple electrical circuit for a given non-domestic situation.
D1 Evaluate electrical and magnetic circuits for a given nondomestic application
P2 Illustrate the key principles of parallel and series circuits.
Achievement Summary
Assessment Criteria
Grade descriptor
Achieved? (tick)
P1 Explain the performance of electrical and magnetic circuits, including transformers.
P2 Illustrate the key principles of parallel and series circuits.
M1 Design a simple electrical circuit for a given non-domestic building.
D1 Evaluate electrical and magnetic circuits for a given nondomestic installation
Assignment Feedback
LO1 Discuss the fundamentals of electricity, magnetism, transformers and circuits
Feedback to Learner:
Learner comments:
Assessor signature
Date
Student signature
Date
Order this Assignment Now:£129
100% Plagiarism Free & Custom Written, Tailored to your instructions
